Block Reference

Room Processor Selector Block

The Room Processor Selector block provides the ability to select among input choices. In a room combine, the choices are either local room audio only, or local room audio and Distributed Program Bus inputs (if the Distributed Program bus is configured). The block contains a Selector control that you can link to a remote device, giving end users the ability to select the input they want. This block is identical to the standalone Selector block, with the exception that, in a room combine, there will never be multiple local input channels. The local input channel is a sum of the microphone and line inputs coming into the room.

To access this block, locate the relevant Room Combine Processor block on your Processing Map and open its properties. Click the Room Processors tab. Locate the relevant Room Processor block and open its properties. This Selector block, which is a child block of the Room Processor block, appears. From here, you can open the Selector block properties by double-clicking the block or hovering and clicking the properties icon that appears in the upper right of the block's title bar.

note: The signal path through the block is pre-wired and cannot be changed.

For more details, see the Room Processor Block and About Room Combine.