Zone Processor Level Block
The Zone Processor Level block controls the volume of the zone's audio. The block includes a full-range level control from +12 dB to -88 dB. Provide end users with control over the zone audio volume by linking a DR1 or DR3 Level control to the Gain control of the Zone Processor Level block. Limit the range of volume control by setting the Minimum and Maximum parameters. Selecting Off @ Min mutes the audio when the level control reaches the specified minimum value. A Mute switch in the Zone Processor Level block allows muting the page audio without affecting the level control.
To access this block, locate a Zone Processor block on your Processing Map and open its properties. This Level block, which is a child block of the Zone Processor block, appears. From here, you can open the Level block properties by double-clicking the block or hovering and clicking the properties icon that appears in the upper right of the block's title bar.
note: The signal path through the block is pre-wired and cannot be changed.
For more details, see the Zone Processor Block and About Zone Processing.
See Also- About Zone Processing
- Common Features in all Processing Blocks
- Configuring a Zone with Priority Inputs and Selection Control
- Configuring Priority Inputs
- Creating a Zone Processor
- Paging and Room Combine Blocks
- Reference for Processing Blocks and Controls
- Testing a Zone Processor
- Using Priority Inputs without Selection Control
- Zone Processor Blocks