Relay Out Controls

Purpose

Provides a central location for:

linking the Relay Out control(s) with one or more other control(s) in the system
changing which item is selected (Selector control only)
customizing the name (displayed in the software) of each item in the selection list (Selector control only)
changing the Toggle state (Toggle control only)

User Interface Elements

Toggle Control

UI Element	Purpose
Toggle	Reflects the current state of the Toggle control—on (checkbox is selected) or off (checkbox is not selected), which you can control from within the software. note: Relay Out ports default to the Toggle mode. You can, however, change the mode configuration. From this properties dialog box, you can link the control to a Toggle control on the Processing Map (for example, a Mute control). To do so, click, drag, and drop the Relay Out Toggle link icon onto the link icon of the Toggle control on the Processing Map.

UI Element

Purpose

Toggle

Reflects the current state of the Toggle control—on (checkbox is selected) or off (checkbox is not selected), which you can control from within the software.

note: Relay Out ports default to the Toggle mode. You can, however, change the mode configuration.

From this properties dialog box, you can link the control to a Toggle control on the Processing Map (for example, a Mute control). To do so, click, drag, and drop the Relay Out Toggle link icon onto the link icon of the Toggle control on the Processing Map.

Selector Control

UI Element	Purpose
Selections	Displays the two selections available on the control (On/Off). note: Relay Out ports default to the Toggle mode. To use the Selector control, you must change the mode configuration of the port. From this properties dialog box, you can link the control to a Selector control on the Processing Map (with only two selections on it). To do so, click, drag, and drop the Relay Out Selector link icon onto the link icon of the Selector control on the Processing Map. Provide custom names for each selection by clicking the edit icon and then typing in the edit box that appears. This name is visible in the software only.

UI Element

Purpose

Selections

Displays the two selections available on the control (On/Off).

note: Relay Out ports default to the Toggle mode. To use the Selector control, you must change the mode configuration of the port.

From this properties dialog box, you can link the control to a Selector control on the Processing Map (with only two selections on it). To do so, click, drag, and drop the Relay Out Selector link icon onto the link icon of the Selector control on the Processing Map.

Provide custom names for each selection by clicking the edit icon and then typing in the edit box that appears. This name is visible in the software only.