Working with Multiple Blocks in the Processing Map

• Click and drag a box around all the blocks you want to select:
• While holding down the Ctrl Key click on any additional blocks you want to select (or unselect).
• Press Ctrl-A to select all of the blocks in the Processing Map.

note: These selection methods may be used together in any combination

1. Select the blocks as described above.
2. Right click any selected block.
3. Select View Block(s) Properties: The properties dialog box for each selected block opens.

• Select the blocks as described above, and then click and drag one of the blocks. The other selected blocks move as well.

• Select the blocks as described above, and then press the Delete key.

1. Open the All Presets dialog box or the individual preset's properties dialog box.
2. Confirm that the blocks you want to add are configured correctly for the preset.
3. Select the blocks as described above.
4. Click and drag the preset icon for any of the selected blocks into the preset. All the selected blocks are added to the preset.

1. Confirm that the blocks you want to add are configured the way you want them for saving to the Baseline.
2. Select the blocks as described above.
3. Right click on any selected block.
4. Select Save Block(s) to Baseline: