Open topic with navigation
Muting/Unmuting Audio on an Entire HAL System
From within Halogen, you can mute and unmute your entire HAL System with a single click.
note: By default, the system is muted when it powers up and also when a new configuration is loaded or applied. In most cases, you will likely unmute the system gradually—one output or zone at a time. If you want to unmute the entire system all at once, use the method described in this topic.
-
- From the Device menu in the application toolbar, click Connect:
- In the Connect to Device dialog box that appears, find the HAL device you want:
- Click the Connect button associated with that HAL device.
- From the Mute menu in the application toolbar, click Mute: The Mute menu changes to show that the system is muted:
-
- From the Device menu in the application toolbar, click Connect:
- In the Connect to Device dialog box that appears, find the HAL device you want:
- Click the Connect button associated with that HAL device.
- From the Mute menu in the application toolbar, click Unmute: The Mute menu changes to show that the system is unmuted:
Open topic with navigation